View MBR350RLG_741864.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MBR350, MBR360
MBR360 is a Preferred Device
Axial Lead Rectifiers
These devices employ the Schottky Barrier principle in a large area metal-to-silicon power diode. State-of-the-art geometry features epitaxial construction with oxide passivation and metal overlap contact. Ideally suited for use as rectifiers in low-voltage, high-frequency inverters, free wheeling diodes, and polarity protection diodes.
Features
http://onsemi.com
* * * * *
Extremely Low vF Low Power Loss/High Efficiency Highly Stable Oxide Passivated Junction Low Stored Charge, Majority Carrier Conduction Pb-Free Packages are Available*
SCHOTTKY BARRIER RECTIFIERS 3.0 AMPERES 50, 60 VOLTS
Mechanical Characteristics:
* Case: Epoxy, Molded * Weight: 1.1 Gram (Approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal * *
Leads are Readily Solderable Lead Temperature for Soldering Purposes: 260C Max. for 10 Seconds Polarity: Cathode indicated by Polarity Band
MAXIMUM RATINGS
Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Symbol VRRM VRWM VR IO IFSM Max Unit V 50 60 3.0 80 A A
AXIAL LEAD CASE 267-05 (DO-201AD) STYLE 1
MARKING DIAGRAM
MBR350 MBR360
Average Rectified Forward Current TA = 65C (RqJA = 28C/W, P.C. Board Mounting) Non-Repetitive Peak Surge Current (Note 1) (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz, TL = 75C) Operating and Storage Junction Temperature Range (Reverse Voltage Applied)
A MBR 3x0G G
TJ, Tstg
-65 to +150
C A x G (Note: = Assembly Location = 5 or 6 = Pb-Free Package Microdot may be in either location)
THERMAL CHARACTERISTICS
Thermal Resistance, Junction-to-Ambient (see Note 4 - Mounting Data, Mounting Method 3) RqJA 28 C/W
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Lead Temperature reference is cathode lead 1/32 in from case.
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 3 of this data sheet. Preferred devices are recommended choices for future use and best overall value.
*For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
(c) Semiconductor Components Industries, LLC, 2006
1
June, 2006 - Rev. 6
Publication Order Number: MBR350/D
MBR350, MBR360
ELECTRICAL CHARACTERISTICS (TL = 25C unless otherwise noted) (Note 2)
Characteristic Maximum Instantaneous Forward Voltage (Note 3) (iF = 1.0 Amp) (iF = 3.0 Amp) (iF = 9.4 Amp) Maximum Instantaneous Reverse Current @ Rated DC Voltage (Note 3) TL = 25C TL = 100C 2. Lead Temperature reference is cathode lead 1/32 in from case. 3. Pulse Test: Pulse Width = 300 ms, Duty Cycle = 2.0%. Symbol vF 0.600 0.740 1.080 iR 0.60 20 mA Max Unit V
20 I , REVERSE CURRENT (mA) R TJ = 100C 10 7.0 5.0 i , INSTANTANEOUS FORWARD CURRENT (AMPS) F 3.0 2.0 75C 25C
20 10 5.0 2.0 1.0 0.50 0.20 0.10 0.05 0.02 0.01 0.005 0.002 0 10
TJ = 150C
100C 75C *The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR. 25C 20 30 40 50 VR REVERSE VOLTAGE (VOLTS) 60 80
1.0 0.7 0.5 , AVERAGE FORWARD CURRENT (AMPS) 5.0 0.3 0.2
Figure 2. Typical Reverse Current*
4.0
RATED VR RqJA = 28C/W DC
0.1 0.07 0.05 0.03 0.02 0 0.2 0.6 0.8 0.4 1.0 vF, INSTANTANEOUS VOLTAGE (VOLTS) 1.2 1.4
3.0
SQUARE WAVE
2.0
1.0
F (AV)
TJ = 150C
0 0 20 40 60 80 100 120 TA, AMBIENT TEMPERATURE (C) 140 160
I
Figure 1. Typical Forward Voltage
Figure 3. Current Derating Ambient (Mounting Method 3 per Note 4)
http://onsemi.com
2
MBR350, MBR360
P , AVERAGE POWER DISSIPATION (WATTS) F (AV) 5.0 300 TJ = 150C C, CAPACITANCE (pF) 200 TJ = 25C
4.0
3.0
SQUARE WAVE dc
100 70 50 40
2.0
1.0
0 0 2.0 3.0 4.0 IF (AV), AVERAGE FORWARD CURRENT (AMPS) 1.0 5.0
30 0 10 20 30 40 VR, REVERSE VOLTAGE (VOLTS) 50
Figure 4. Power Dissipation
Figure 5. Typical Capacitance
NOTE 4 -- MOUNTING DATA
Data shown for thermal resistance, junction-to-ambient (RqJA) for the mountings shown is to be used as typical guideline values for preliminary engineering, or in case the tie point temperature cannot be measured.
TYPICAL VALUES FOR RqJA IN STILL AIR Mounting Method 1 2 3 Lead Length, L (in) 1/8 50 58 1/4 51 59 28 1/2 53 61 3/4 55 63 RqJA C/W C/W C/W
Mounting Method 1
P.C. Board where available copper surface is small.
L L
Mounting Method 2
Vector Push-In Terminals T-28
L L
Mounting Method 3
P.C. Board with 2-1/2 in X 2-1/2 in copper surface. L = 1/2''
EE EE EE EE EEEEEEEEEE EE EEEEEEEEEE EE EE EEEEEEEEEEE
ORDERING INFORMATION
Device MBR350RL MBR350RLG MBR360 MBR360G MBR360RL MBR360RLG Package Axial Lead Axial Lead (Pb-Free) Axial Lead Axial Lead (Pb-Free) Axial Lead Axial Lead (Pb-Free)
Board Ground Plane
Shipping 1500 Units / Tape & Reel 1500 Units / Tape & Reel 500 Units / Bag 500 Units / Bag 1500 Units / Tape & Reel 1500 Units / Tape & Reel
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.
http://onsemi.com
3
MBR350, MBR360
PACKAGE DIMENSIONS AXIAL LEAD CASE 267-05 (DO-201AD) ISSUE G
K D
1
A
2
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. DIM A B D K INCHES MIN MAX 0.287 0.374 0.189 0.209 0.047 0.051 1.000 --- MILLIMETERS MIN MAX 7.30 9.50 4.80 5.30 1.20 1.30 25.40 ---
B
K
STYLE 1: PIN 1. CATHODE (POLARITY BAND) 2. ANODE
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative
http://onsemi.com
4
MBR350/D

▲Up To Search▲

Price & Availability of MBR350RLG

	To Download MBR350RLG Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .